SWELLPRO Splash Drone 3, Руководство по настройке, Страница: 9 / 17

9
The basic sensitivity is mainly used to adjust the aircraft rack, set the range from 0% to 1000%,
the default value is 50%, basic sensitivity too high will cause aircraft posture shaking, too low
will cause the aircraft stability and control sense become worse.
Suggestion and adjustment method of basic sensitivity:
ü
Sensitivity increases 10% each time, until the aircraft starts to shake;
ü
When occur Jitter, then properly reduce the sensitivity, until the aircraft can fly normally.
Default base sensitivity:
Roll 100%, Pitch 100%, Yaw 60%
[3] Control sensitivity settings
The control sensitivity is used to adjust the control handle feeling, ranging from 0% to 500%,
the default value is 100%, the greater change degree of control the faster reaction, sensitivity
is too high will lead to the attitude control is too stiff, sensitivity is too low will cause the attitude
control is too soft.
Proposed control sensitivity adjustment method:
With an initial value of 100%, it is recommended to increase or decrease about 20% of the
sensitivity each time to achieve the desired flying feel of the user.
d.
Accelerometer calibration
i. Interface description
This interface is used to calibrate flight control IMU, which can be selected with single side
calibration or six sides calibration.
[1] Accelerometer interface assistance statement.
[2] Calibration prompt area is used to guide and prompt the user accelerometer calibration
steps.
[3] One side calibration button, click start calibration.