SWELLPRO Splash Drone 3, Руководство по настройке, Страница: 8 / 17

8
1. when you change a different remote control, you must adjust the remote
control.
2. please set the remote control to the multi rotor mode and turn off the hybrid
control.
3. make sure that the joystick moves in the same direction as the software
prompt.
iv. Flight mode settings
Optional flight modes include attitude-
autostability
, attitude-set high, GPS-speed, GPS- angle,
intelligent surround, smart turn (Intelligent heading), cruise control, speed change cruise.
The default flight modes for flight control are: 1. Stance-set high, 2. Smart turn (Intelligent
heading), 3. GPS- speed.
v. Out of control settings
SBUS receiver comes with out of control protection, the factory has been set up by default,
don’t need change the protection of out of control settings.
Note: if the receiver loses the remote control signal, the flight control will start out of control
protection and will trigger automatic return.
c.
Sensitivity
The interface is used to set the flight sensitivity, including the basic sensitivity and control
sensitivity, to ensure that the aircraft achieve the desired flight state and control feel. The
factory has been adjusted for the best, not recommended to make adjustments.
[1] Sensitivity interface assistance statement
[2] Basic sensitivity settings