Swegon REACT Pa, Инструкция по эксплуатации

Страница: 5 / 8

5
20200910 Swegon reserves the right to alter specifications.
REACT P
Function Description
Addr
Enables you to set the actuator's Modbus address, by turning the "edit wheel". It
is possible to set the address from 1 till 247. If you turn the value selector to end
stop "+", the display will show a "2". This makes it possible to select the second
level. If you select the second level, this is indicated in the display by a small circle.
The following functions are available at the second level:
Pres/Unit
Return to previous level
P
min
Not used.
P
max
Not used.
Test Not used.
Mode Shows the angle of the rotation (0…255 digital 0....100%)
Addr. Used for selecting communication settings for Modbus. See table below.
P
nom
Used for setting response delay for the Modbus communication (see separate
documents)
How to use Modbus
Modbus tables are available in a separate document (REACT-Modbus-m)
Display number EEPROM value Communication rate Parity Stop bits
1
3
0 1200 None 2
2 3 1 1200 Even 1
3 3 2 1200 Odd 1
4 3 2400 None 2
5 4 2400 Even 1
6 5 2400 Odd 1
7 6 4800 None 2
8 7 4800 Even 1
9 8 4800 Odd 1
10 9 9600 None 2
11 10 9600 Even 1
12 11 9600 Odd 1
13 12 19200 None 2
14
4
13 19200 Even 1
15 14 19200 Odd 1
16 15 38400 None 2
17 16 38400 Even 1
18 17 38400 Odd 1
19 3 18 1200 None 1
20 19 2400 None 1
21 20 4800 None 1
22 21 9600 None 1
23 22 19200 None 1
24 23 38400 None 1
3 Limited data length per reading of max. 8 addresses
4
Default setting