Swegon AQUA Link, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 21

5
For specifications, available models, and technical data please refer to the AQUA Link TECHNICAL BOOKLET.
CONFIGURATIONS
EXAMPLE OF A CONFIGURATION
AQUA Link 140 1P 1PM IN LN 30
1 2 3 4 5 6 7
1: series
2: size
3: pumps set-up to the primary circuit
4: pumps set-up to the secondary circuit
5: model
6: any silenced model
7: glycol percentage
The possible values for each digit of the alpha-numerical identification code of the unit can be the following:
1: AQUA Link
2: 110 / 140 / 220 / 300 (It shows the indicative power range of the combined chiller in kW)
3: 1P / 2P / 1PM / 2PM (number and type of primary circuit pumps; M= Oversized)
4: 1P / 2P / 1PM / 2PM (number and type of secondary circuit pumps; M= Oversized. The number of secondary circuit
pumps, if available as accessories, must be in line with the number of the primary circuit pumps)
5: IN (for indoor models) / OD (for outdoor models)
6: blank / LN (any silenced models. If it is a standard model, the relevant field will not be filled in. Silenced models are only
available for indoor installation, as it is provided with containment panelling as an accessory)
7: NG /digit between 20 and 40. It shows the glycol percentage expected on the primary circuit. The acronym NG stands for
no glycols in the primary circuit.
EXAMPLE OF UNIT CLASSIFICATION
AQUA Link 140 1P 1PM IN LN 30
GLYCOL VERSION
Power to UTA Power to Chilled Beams
20% 80%
30% 70%
40% 60%
NO GLYCOL VERSION
Power to UTA Power to Chilled Beams
80% 20%
70% 30%
60% 40%
SERIES: AQUA Link
SIZE: 140
INDOOR MODEL
SETTING UP OF SECONDARY CIRCUIT
PUMPS: 1 oversized head pump
SILENCED VERSION
Accessory for indoor models only
GLYCOL PERCENT
30% glicole
SETTING UP PRIMARY CIRCUIT
PUMP:
1 standard head pump