manualshive.com logo in svg

Swegon Actionair ThermShield FD, Руководство по установке


Поделиться
Скачать
background image

INSTALLATION GUIDE  

ThermShield Standard Installation Method 

(Square/Rectangular)

Applies to...

•  Actionair ThermShield FD

Health and safety

•  This process must be undertaken by competent per-

sons. More than one person may be required to ensure 
the safe handling of large dampers and other materi-
als. Use must be made of access equipment to ensure 

unsafe practices are not used to approach walls or diffi

-

cult access areas.

•  Standard site PPE should be used (minimum steel toe 

cap boots, hard hat); together with any protective 
eyewear, gloves and masks, when drilling or cutting is 
being undertaken. The latter should also be used when 

handing the wall construction materials, as defined by 

the material suppliers. If loud equipment is being used, 
hearing protection should be used.

•  All waste materials should be collected and disposed of 

as defined by the relevant supplier.

•  Actuators: All wiring should be carried out in accor-

dance with the wiring details provided by the IEE and 
BS regulations and by a competent person. Care must 
be taken when installing and inspecting dampers, as 
they are likely to close without warning due to loss of 
electrical power or a temperature rise in the ductwork. 
This is their prime function. Do not insert any items, 

fingers or limbs between the blades. Larger dampers 

must be handled in accordance with current regula-
tions and good practice due to weight.

Contents

Applies to... .......................................... 1
Health and safety .................................. 1

CE Installation Method Overview ..................... 2
Fire damper installation openings ..................... 3
Rigid wall installation (mortar sealing)............. 4
Rigid wall installation (mineral wool sealing) .. 5
Rigid wall installation (Fire Batt) ....................... 6
Flexible wall installation (mortar sealing) ........ 7
Flexible wall installation (mineral wool 
sealing) ................................................................ 8
Flexible wall installation (Fire Batt) ................... 9
Rigid floor/ceiling installation (mortar 
sealing) .............................................................. 10
Rigid floor/ceiling installation (Fire Batt) ....... 11
Suspension for mortarless floor installation .. 12
Suspension for mortarless ceiling installation 13
Suspension for mortarless installation close to 
ceiling ................................................................. 14
Battery assembly installation 2x2 ................... 15
Battery assembly installation (floor/ceiling) 
2x2 ..................................................................... 16
Battery assembly installation 1x2 ................... 17
Minimal seperation damper installation ......... 18

Periodic maintenance ............................ 20 

Actuators ............................................21
Wiring Diagrams .................................. 24
Dimensional Data ................................. 26
Inspection and handover check sheet ........ 28

Содержание Actionair ThermShield FD





























Отзывы:

Нет отзывов

Похожие инструкции для Actionair ThermShield FD

RFT CRS60 Instruction Manual preview
CRS60
Бренд: RFT Страницы: 27
GILBERTS SMOKEGARD Manual preview
SMOKEGARD
Бренд: GILBERTS Страницы: 12
Mandik FDMB Manual preview
FDMB
Бренд: Mandik Страницы: 76
Madel FOK-EIS-180 Manual preview
FOK-EIS-180
Бренд: Madel Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды