6
•
NOTE: The condensation of the haze, makes floors, stairs and other surfaces
slippery. Do NOT direct the machine’s haze output beam towards cool or hard
surfaces like wood, plastics, glass or metal. If the machine is frequently used, or
used for a long time, check frequently that no surface is slippery.
•
NEVER mix or dilute the fluid.
•
NEVER heat the fluid. Use room temperature fluid only.
•
The machine is for indoor-use only. NEVER use in a dusty environment. Keep away
from moisture!
•
Operate in room temperature only. Min. operating temperature is +10
°
C, max.
temperature is +30
°
C.
•
NEVER cover vents or air inlets on the machine housing.
•
NEVER use dimmers to control the power to the machine. The machine must be
either ON or OFF: the output from the machine is controlled only through the length
of intervals when it is ON. If mains voltage input is regulated through a dimmer
switch, the compressor and other electric components will be damaged.
•
Service internal parts ONLY if you have the know-how and experience to perform
the service correctly. If not, please contact a Swefog service centre or the
manufacturer. NOTE: Incorrect service and/or use of non-original spare parts will
void the warranty.
•
NEVER change parts or details inside, use original spare parts only!
•
Do not overfill the machine. NEVER switch power on if fluid level is above the ”max”
symbol.
•
NOTE: If there is a fluid leakage or spillage, wipe off fluid. DO NOT use the machine
until it is mended.
•
NOTE: The haze may cause residues on mirrors, lenses and similar components if
the fog concentration is too high in the air. Equipment using fan ventilation may
draw haze through the lamp housing, which may cause residues. Always check
carefully where to direct the output of the machine, and keep equipment that uses
fans away from the haze.
