English version
Installation of hardware
Take the following precautionary measures prior to installing the hardware:
• Ensure the PC is switched off and not connected to the mains or any other power supply.
• Also, disconnect the printer and monitor cables (they have their own power supply) to make absolutely sure that the PC is not live.
• Now unscrew the computer casing.
• Subsequently, remove any static electricity you may carry on your body. Do this by touching a (neutral) pipe of the central heating system
or an unpainted water pipe, among other things. Please note that you must not use a magnetic screwdriver for this. Before you proceed any
further, shortly touch the iron frame of the PC casing. Make sure that you minimise contact with any contact points of the PC Card or the
memory.
• Find a vacant PCI slot and remove the metal guard plate part of the computer casing in front of the relevant slot. On occasion the card does
not allow to be inserted in the PCI slot smoothly. Should this be the case, do not force anything, but try another available slot.
• Once the card has been successfully installed, check whether all other cards are still properly inserted in the PCI slots. It is possible that the
other PCI cards are lifted up slightly when installing a new PCI card; as a result, the relevant cards or even the entire PC may no longer
operate correctly.
• Replace the casing on the computer base and correctly reconnect all cables.
• Switch on the PC again.
Windows 98SE installation
Start the PC once the hardware installation has been completed. Windows will automatically detect the Sweex LAN PCI Card 10/100 Mbps.
Click ‘Next’ in the corresponding screen which will appear automatically. Now select the option ‘Search for the best driver’ and click ‘Next’.
In the next screen, select the CD-ROM Drive as the location for the search to be carried out. Windows will locate the driver on the CD-ROM (if
not, it can also be found on the CD-ROM - Drivers via ‘Specify a location’. Subsequently, select ‘Use the updated driver’ and click ‘Next’. The
hardware has been installed successfully and is ready to be used.
Installation Windows 2000/XP
Start the PC once the hardware installation has been completed. Windows will automatically detect the Sweex LAN PCI Card 10/100 Mbps.
No drivers are required for installation under Windows 2000 and Windows XP as they are all present within the operating system, provided it is
up-to-date. If Windows nevertheless indicates that the hardware must be installed, follow the installation procedure as described under Windows
98SE.
Warranty
All products under the Sweex brand are warranted for a period of three years. We do not grant support or warranties for any software and/or
(rechargeable) batteries included. Warranty claims are settled only via the dealer where the product concerned was purchased.
The rightful owner has and retains title to all brand names and related rights mentioned in this manual.
