Operation
Preparation
Using
NOTES
Before use, please ensure that all parts of the machine have been
installed, and check whether the battery pack is sufficient. If lower
than 30%, please charge it before use (see page 5 for power
indicator).
Choose the use mode according to the actual use requirements.
If dry wipe mode, you can use it directly; if wet wipe mode, please
inject clean water or neutral detergent into the water tank before
use.
Step on the floor brush and pull the handle backward. After hearing
the release sound of the lock, the whole unit enters the standby
state.After use, push the handle forward to stand upright. When you
hear the locking sound, it will be turned off.
In standby mode, press the power button to start the cleaning
machine; press it again to stop working.
Press the spray button, the water spraying nozzle starts to spray
continuously; press it again to stop spraying.
In the process of using the machine, if there is any abnormality,
please shut down the machine in time and refer to the chapter of
TROUBLE SHOOTING
.
If you do not use the machine for a long time, please remove the
battery pack and store it properly.
Spray Button
Power Button
Power Off
Standby
