Daily maintenance and Installation
Removal, Water Injection and Assembly of Clean Water Tank
Hold the fuselage steady, put your hand into the position shown and pull up,
then the clean water tank can be removed.
Open the water tank lid, add water (no more than 40 ° C temperature), tighten
the cap and ensure tight no leakage.
Assemble the clean water tank head downward toward the tank and back to the
body, the installation is successful after heard the lock sound.
“KA”
Suction Nozzle
Cleaning the Suction Nozzle
It’s recommended to clean the nozzle regularly after use to keep it clean and tidy
Refer to the roller brush cover section to remove
Put the cleaning brush into the suction nozzle and draw the dirt out by circling it
After cleaning, the roller brush and its cover can be installed back to the body.
Note: Do not add water whose temperature exceeds 40
℃
Note: Optional cleaning brush
