USER GUIDE
Ɩ
EM8500 SERIES
Copyright
2016, EM Microelectronic-Marin SA
EMDVK8500-MN01, Version 2.0, 5-Jul-16
14
420005-A01, 3.0
5.3
STAND-ALONE MODE
In this mode the Base Board is not powered from the PC (no USB over the USB connection) or is even detached
from the other two boards. . The EM8500 SPI/I
2
C interface is connected to the application board. The application
is running. In this mode ADC acquisitions are not performed.
The corresponding mode is shown on the Figure 5-4 EMDVK8500 Stand-alone Mode with default application board.
EM6819 MCU
RF EM9301
BTN, LEDS
APPLICATION BOARD
DAUGHTER BOARD
EM8500
+ +
+
+
LTS
+
STS
P
O
W
E
R
HRV
P
O
W
E
R
_
G
R
O
U
N
D
I
2
C
/
S
P
I
Figure 5-4 EMDVK8500 Stand-alone Mode with default application board
The other application mode option is the application board without default application board. The user directly
accesses the application header available on the daughter board. The corresponding mode is shown on the Figure
5-5 EMDVK8500 Stand-alone Mode with user application connections.
