USER GUIDE
Ɩ
EM8500 SERIES
Copyright
2016, EM Microelectronic-Marin SA
EMDVK8500-MN01, Version 2.0, 5-Jul-16
7
420005-A01, 3.0
After installation, the Start Menu now contains the following shortcuts
From this Menu, two update tools are available.
Ɩ
The shortcut
Online Update Check
is used to check for new EM8500 DevExplorer software release. Use
this shortcut to check for updates.
Ɩ
The shortcut
Firmware Loader (Third-Party tool)
is used to udpate the firmware of the EM8500 base
board.
Each EM8500 DevExplorer software contains a programming Hex file for the Base Board firmware.
Use this shortcut to do the firmware update if required
Note:
In case you decide to directly check for an update during your initial installation (answering yes to the below
message requires that your PC has an active
internet connection
), the following message will be displayed.
Click
Yes.
In the below installation example, an update has been found.
Click
Yes.
Then the normal procedure installation needs to be followed.
Click
OK
and follow the normal installation flow
.
