manualshive.com logo in svg

SWASH SFF1000CSA series, Техническое образование

Поделиться
Скачать
SWASH SFF1000CSA series Скачать руководство пользователя страница 27

COMPONENT ACCESS

SWASH™ Clothing Care System   

n

 

3-7

Removing the Pump Assembly

1.

  First, perform procedure on page 3-4, “Removing the Rear 

Panel” prior to performing the following steps. 

2.

  Next, perform procedure on page 3-5, “Removing Top 

Cover and Control Housing. 

3. 

Disconnect hose from Pump Assembly (see Figure 1).

4.

  Disconnect hoses from “T” fitting (see Figure 1).

5.

  Disconnect harness from Pump Assembly (see Figure 1). 

6.

  Using a 1/4” nut driver, remove the four (4) screws 

securing the Pump Assembly to the control bracket (see 

Figure 1). Remove Pump Assembly from the unit.  

Figure 1 - Pump Assembly

Removing Pump, ACU, and Thermistor

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Failure to do so can result in death or

electrical shock.

Replace all parts and panels before operating.

Removing the Appliance Control Unit (ACU)

1.

  First, perform procedure on page 3-4, “Removing the Rear 

Panel” prior to performing the following steps. 

2.

  Next, perform procedure on page 3-5, “Removing Top 

Cover and Control Housing. 

3.

  Disconnect the four (4) harnesses from the Appliance 

Control Unit (ACU).

4.

  Using a 1/4” nut driver, remove the one (1) screw securing 

the ACU to the control bracket (see Figure 1). Remove 

ACU from unit.  

Figure 1 - ACU

Removing the Thermistor

1.

  First, perform procedure on page 3-4, “Removing the Rear 

Panel” prior to performing the following steps. 

2.

  Next, perform procedure on page 3-5, “Removing Top 

Cover and Control Housing. 

3.

  Disconnect the two (2) wires going to the Thermistor 

Assembly (see Figure 1). 

4.

  Using a 1/4” nut driver, remove the two (2) screws 

securing the Thermistor to the control bracket (see Figure 

1). Remove Thermistor from unit.  

Figure 1 - Thermistor

Thermistor

Wires

Pump Hose

Pump Harness

“T” Fitting Hoses

Содержание SFF1000CSA series



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды