SWASH SFF1000CSA series, Техническое образование

Страница: 25 / 50

COMPONENT ACCESS
SWASH™ Clothing Care System
n
3-5
1. First, perform procedure on page 3-4, “Removing the Rear
Panel” prior to performing the following steps.
2. Remove the top cover by sliding the cover back “slightly”
towards the rear of the unit (see Figure 1).
Figure 1
3. Lift the top up and away from the unit—starting from the
back (see Figure 2). Remove cover and set aside.
Figure 2
Removing the Top Cover & Control Housing
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
4. Using a 1/4” socket, remove the six (6) screws (3 on each
side) securing the control housing to the unit (see Figure 3).
Figure 3
5. Remove harness shield from back of the control housing
(see Figure 4).
Figure 4
6. Remove control housing and set aside (see Figure 5).
Figure 5
Slide cover towards rear
Lift up cover and remove
Control Housing
Cover Slots
Harness Shield