42
Connecting the USB Antenna
Connect the mini-USB connection on the
provided USB cable to the mini-USB port
on the USB antenna. Connect the other
end to a spare USB port at the rear of the
NVR.
When the USB antenna is connected to
the NVR you will see a blue LED at the top
and bottom.
If the NVR hasn’t detected the USB
antenna, you will see “Motion” at
the Main Menu instead of “Alarm”.
Make sure the antenna is connected
correctly then restart the NVR.
The top and bottom LED will flash blue
to indicate the USB antenna is initialising.
The LED will stop flashing when the
antenna is ready.
The bottom LED will flash red when the
wireless siren has been triggered.
