17
6
Pairing the PIR Movement Sensors
1.
To access the “Alarm” menu, right-click the mouse at the Live View
screen, click “Menu”, click “Alarm” then click the “Alarm” tab.
2.
Click “Begin Pair”.
3.
Activate the movement sensor by moving in front of it. The LED will
flash red and the DVR will detect the sensor and add it to the sensor list.
Repeat this step for any other movement sensors.
Please note, to conserve battery power, the PIR movement sensor when
activated will wait five seconds to activate again.
Group
- There are three options available to group your sensors. For
the PIR movement sensor it is recommended that you set this to “Gen-
eral”. This means any movement within the vicinity of the sensor will
then activate the wireless siren to be activated when you select “Arm”
in the “Alarm Control” menu. You can change this group when you have
finished pairing.
