15
Network: Advanced Settings
DDNS Setup:
Opens the DDNS setup window.
NTP Setup:
Opens the Network Time Protocol setup window.
Email Setting:
Opens the Email Setup window.
Server Port:
One of the two ports the device needs to communicate over your network. Ensure nothing else
uses this port. The default value is 9000. This is the port number you’ll use when logging in over the Internet
from the SwannView Link software or remote access from a mobile device.
HTTP Port:
The second of two ports the device needs to communicate over your network. Ensure nothing
else uses this port. The default value is 85.
Alarm: Motion Detection
Channel:
The channel you’re configuring the motion detection settings for.
Enable:
Whether the motion detection is enabled for the channel currently selected.
Sensitivity:
A sliding scale between 1 and 50. The number refers to the number of pixels (as a percentage)
that have to change between frames.
Action:
What you’d like the device to do when it detects motion. Typically (assuming the schedule is config-
ured to do so) this will be to record video. It can also be a cue to trigger an email alert.
Alarm: Exception
Exception Type:
What event type you’d like the device to react to. By configuring the Action for these events,
you can create any combination of audio alerts or auto-emails to be sent for different event types.
Audio Warning:
Not supported by this device.
Send Email:
Commands the device to send an email alert.
Show Exception:
Shows any alerts that occur at the bottom right corner of the main screen. Double-click
on the alert notification to see details.
Содержание SwannSecure
Страница 1: ...1 SwannSecure EN INSTRUCTION MANUAL ...
