14
Recording: Advanced Config
Overwrite:
Whether the device will erase old recordings to make room for new ones, or not.
Pre-record:
Whether the device will cache and save footage that occurs immediately before an alarm/mo-
tion event.
Delay:
How long after an alarm event or motion the device will continue to record for.
Pack Duration:
The amount of video that will be stored as a single “pack”. Unless you have very specific
requirements, leave this at the default value.
Recording: Schedule
Use the Copy To functions to quickly assign identical schedule layouts to multiple channels at once.
Be careful when programming your schedule. It’s one of the most important aspects of setting up your de-
vice, and if it’s wrong in any way, it could lead to complications later.
Note:
Do NOT select Normal and Motion/Alarm-based recording at the same time on the same channel -
this can cause conflicts in the way that the device interprets footage and event information.
Network Access:
How your network is addressed - either DHCP or STATIC IP addressing.
Subnet Mask:
A required additional piece of IP addressing information.
Gateway:
The way “out” of your network, to the Internet.
Auto DNS / Static DNS:
Whether the device will automatically select a DNS server, or use one you assign.
Preferred / Alternate DNS:
The device has two DNS servers, essentially a primary and a backup.
MAC Address:
The Media Access Control address. For some advanced networking, it can help to know this
value.
Содержание SwannSecure
Страница 1: ...1 SwannSecure EN INSTRUCTION MANUAL ...
