10
1. The filter is designed to reduce the build-up of limescale which occurs during steam
ironing, this will prolong the working life of your iron. However, please note that the
filter will not completely stop the natural process of limescale build-up.
2. The filter will need to be changed every 2 months on average.
The filter can still be used even if a new one is not available at
that time. However, limescale may build up in the steam chamber,
This happens depending on your local water hardness. It is advised that
the filter is replaced as soon as possible. Alternatively, use bottled/distilled
water.
1. Disconnect the appliance from the power
supply and allow the appliance to cool
down for 60 minutes at least.
2. After use, slide out the water tank and
pour out all the remaining water. (Fig.9)
3. The iron should be placed on the iron rest
plate, and then stored.
Slide water tank out from the base unit, take the filter upward out from water tank,and
then replace with a new one. (For better performance, immerse the new filter in water
for a few minutes before replacing)
Filter Replacement
Anti-calc system
Emptying and storing
Fig.9
old
new
