888
Operating the
OutbackCam
Setting up the
OutbackCam
When the
OutbackCam
is turned on, the SETUP button will access the menu
system. The UP and DOWN buttons are used for navigation, while the OK button
selects or confirms an option.
Date
For setting the
OutbackCam’s
date. Use the up and down buttons to adjust a
value, and the OK button to set a value and move on to the next.
When selected, the date will be shown in the numerical display four digits at a
time, first the YEAR and then the MONTH and DAY.
Time
For setting the OutbackCam’s time. It will display the time in 24-hour format,
allowing you to select first the HOUR and then the MINUTE.
Delay
The amount of time that must elapse between recordings before the OutbackCam
will record again. The time is selected first in MINUTES then in SECONDS.
Format
If you want to clear all the data from an SD card and prepare it for use in the
OutbackCam
, this is the option you’ll want. Before selecting pressing OK, the screen
will show a total count of the number of recordings made by the
OutbackCam
.
When Format is selected, the numerical display will display “FONO”. These are two
options, where FO means “format” and NO means not to format.
Numerical
Display
Battery
Indicator
SD Card
Indicator
Menu
Duty Time
Selector
Mode
Indicator
File Type
Indicator
DATE
TIME
DELAY
FORMAT
MODE
STATUS
DUTY
PIR
TL PIR+TL
3P MOVIE
1P
8888
