Swann Bolt HD, Руководство пользователя, Страница: 9 / 24

9
You Got the Power: Charging the Battery
The SportsCam charges via the mini USB socket on the rear panel.
• Insert the mini-USB plug on the USB adapter or USB cable into
the USB socket on the rear of the
SportsCam .
• Connect one end of the USB adapter or cable to the USB port on
the included power adapter.
Under no circumstances ever connect the SportsCam to any power
source supplying anything other than 5V. It’s safe to connect it to a
USB port on a computer (see below!) and the included power adapter.
Computers don’t cut it!
The current supplied by most computer’s USB ports ( 5V 500mA ) is not
sufficient to properly charge the SportsCam . The SportsCam’s battery
is small, but powerful, and it needs more juice to charge. The supplied
adapter ( 5V 1000mA ) is perfect for the job, and you’ll get much better
results using that.
Charging Status Indicator LEDs
(a.k.a. “Them there glowin’ things!”)
While the SportsCam is charging, the red LED on the rear panel will
light up. It will go out when the SportsCam is fully charged.
The green LED will light up whenever the SportsCam is connected to
power.
As the green and red LEDs are located
very close to one another, you might
need to tilt the SportsCam slightly
relative to your eye to see what both of
them are doing!
The SportsCam takes 2 hours to
charge using the included USB
charger.
It will take much longer from a
USB port, if it charges at all.
The LEDs
are here...
right here.