Swann Bolt HD, Руководство пользователя, Страница: 20 / 24

20
Bar Mount
The bar mount can be used to attach the camera to any
bar or pole thin enough to fit into the mounting clasp.
This is intended for mounting the camera to the
handlebars of a bicycle or motorbike, but can be used
to attach the camera to anything with the right shape
(that is, round).
Attaching the mount:
• Undo the screw holding the clasp shut.
• Apply the mount to the bar you’d like to attach thing to.
• Tighten the screw to secure the mount in place.
• The camera simply clips into position in the upper part of the
mount. But you could figure that bit out, it’s kinda simple.
Surf Board Mount
The included surf board mount can be attached
to any flat surface of sufficient size - typically a
surfboard, but don’t let us limit you.
To apply the mount:
• Carefully clean the area where you’re going to apply the mount.
Ensure that it is completely free of moisture, oils, dust or any other
contaminants. Cleaning alcohol or similar is recommended.
• Carefully align the mounting plate. Once it’s stuck in place, that’s
where it will be for a long time!
• Peel one side of the included adhesive pad, and apply to the
underside of the mount.
• Carefully peel the other side of the adhesive pad and apply to the
surface you want to mount to. Be careful that everything lines up!