Swann Bolt HD, Руководство пользователя

Страница: 19 / 24

19
Mounting the Camera
Aiming the Camera:
To figure out what the camera is looking at, we installed a
neat
targeting laser . We had to sacrifice our plans for the army of sharks
with lasers on their heads to make this happen, so we hope you
appreciate it.
Basically, the little red dot will show you the center of the camera’s
view. Additionally, it can be used as a neat tool to entertain cats.
It will automatically turn on when you start recording with the
SportsCam , and turn off automatically after a few seconds.
If you want to turn it on again, press the button for approximately one
second and release.
Adhesive Fabric Straps
There are two adhesive fabric strips included with the
SportsCam . They have adhesive on one side and hook
& loop fasteners on the other.
You can stick these to any flat, non-porous surface,
and use the hook & loop fastener to attach the camera.
Some points to remember:
• Carefully clean the area where you’re going to apply the strip.
Ensure that it is completely free of moisture, oils, dust or any other
contaminants. Cleaning alcohol or similar is recommended.
• Carefully align the mounting strip. Once it’s stuck in place, that’s it.