21
Mounting Guide
Mounting the camera
is quite straight forward. There are three screw holes in the flat plate on
the base of the camera’s stand (shown above) that can be screwed onto any suitable vertical
or horizontal mounting surface.
•
Use the included screws if attaching to a hardwood surface.
•
The included wall plugs are for use with brickwork, concrete and other masonry.
•
Due to the nature of the stand and the requirements of the antenna, direct ceiling
mounting may not be an option for this camera. However, it could be suspended from
the ceiling by use of a suitable bracket or mounting block if more space is needed.
•
Surfaces not suitable for screwing are not recommended as a mounting point for the
camera.
•
To mount the camera from the ceiling, screw the stand into the thread on the
top
of the
camera’s body making sure you leave room to adjust the antenna angle.
We suggest that between 2.5 and 3m (about 9 - 10 feet) off the ground is the ideal height for
the camera, looking downwards at between 10 to 15 degrees.
Of course, you should have the Receiver with you when aiming the camera - and go with what
looks right to you, even if it differs from the suggestions above. We’ve never been to your house or
business, and we don’t know what it looks like.
