14
14
14
Motion Sensor
The motion sensor on the camera can be confi gured using the software. The motion sensitivity
and the siren period which sounds when motion is detected can be changed. You can set the
software to record an also sound the alarm or just sound the alarm.
Note: to turn the alarm off click the MUTE button (see page 13 - No. 4)
1. The sensitivity level can be set from 0-100 (100 being the
most sensitive) at 0, 12, 25, 37,
50, 62, 75, 87 & 100. Each grey button below “Sensitivity
Level” represents these levels. The yellow button indidcates
the current selection.
2. The siren period can be adjusted the same way as the
sensitivity. Click on a grey button to select between 5, 10,
15, 20, 25, 30, 35, 40 & 45 seconds.
3. Click on the ALARM ONLY button to have the alarm
sound without any recording when motion is detected. The
ALARM & RECORD button will sound the alarm and record
when motion is detected.
4. Click the SAVE button to confi rm the changes.
Record
Recording can be set to a schedule or to the motion sensor.
2. Below the record settings there are camera
icons; you can change the camera that will record
for that 2 hour period. Click the camera icon to
change between cameras 1, 2, 3 & 4.
1. Recording can be set to change between sched-
ule record & motion record every two hours. Click
the empty boxes to change between schedule re-
cord (blue box) motion record (red circle) and leav-
ing it blank will set it to no record.
