Swagelok CWS-D100-1B, Руководство пользователя

Страница: 93 / 277

CWS − D100 − B Welding System Micro Weld Heads

2005 Swagelok Company, All rights reserved
September 2005
4-5
4. Push the micro weld head onto the motor module until
it is firmly seated, then lock the assembly together with
the two side latches. See Figure 4-6(A) and (B).
5. Press
STOP/RESET
.
The rotor turns one revolution and stops at the home
position. The opening in the rotor aligns to the opening
in the micro weld head housing. If not, disconnect the
weld head and repeat the procedure.
A
B
Figure 4-6 Connecting Weld Head and Motor Module
Caution!
Do not force the micro weld
head and motor module
together. The drive gears of
the micro weld head and
motor module must be
aligned for the pieces to
mate correctly. If you have
problems mating the
components, rotate the
micro weld head drive gear a
small amount and try again.
Refer to step 1. on page 4-4.