Swagelok BD2 series, Руководство пользователя

Страница: 5 / 20

5
Installation
CAUTION
Do not use the regulator as a shutoff device. A level of leakage across the regulator seat can
occur during normal operation.
Points of Attention Before Installation
This regulator can be equipped with a variety of different options. Before installing the regulator you should
fully understand the functions of the supplied options and the suitability of your particular regulator for the
intended application.
-
The preferred mounting position of the regulator is horizontal with the spring housing/dome facing
upwards per Fig 3. Alternative mounting positions may increase the risk of component wear.
- It may be necessary to remove the regulator from the system during maintenance or service. Ensure that
this is possible.
- The regulator is suitable for gases or liquids. Ensure compatibility between the regulator
’s materials of
construction and the system media.
Installation
- Verify that the regulator, its connections, and any accessories are undamaged.
- Verify that the regulator and any accessories are suitable for the system operating pressure and
temperature and have suitable connections.
- At the time of delivery any gauge ports may be plugged with blind fittings. Remove these and connect
gauges if desired.
- If inlet/outlet fittings are being used, assemble them to the regulator,
per the manufacturer’s instructions,
prior to installing the regulator in the system.
CAUTION
Ensure all upstream tubing/pipework is clean and free from debris. Any swarf, lint, wire, etc. may
damage the regulator, resulting in a seat leak.
- Verify the flow direction of the system and mount the regulator accordingly.
- This regulator can be bottom mounted or panel mounted. The panel mounting kit can be ordered
separately.
- Securely make the appropriate connections to the regulator in accordance with the procedures
recommended by the connection manufacturer.
- Ensure that the tubing/pipework and the regulator are adequately supported and that there is no stress on
the connections.
- Upstream and downstream shutoff valves should be installed in the system to facilitate servicing,
maintenance, and troubleshooting of the regulator.