manualshive.com logo in svg

Swagelok 8HPH Series, Руководство пользователя

Поделиться
Скачать
Swagelok 8HPH Series Скачать руководство пользователя страница 39

Series 8HPH 

Weld Head User’s Manual     37  

Work Support System

Note:

 The work support is sold separately. 

Right/Left Work Support Instructions: 

1.   Attach the 8 in. work support rails to the series 8HPH weld head 

unit. See Figure 63.

2.  Slide the base onto the rails. 
3.  Set the base to the desired position and secure with the knurled 

thumb screws.  

4.  Attach and set the right and/or left brace to the appropriate height 

on the base. Lock in place using the knurled thumb screw. 

Note:

 The right or left brace can be used with the V-notch for tubing 

or the flat side as needed.

•  For the left work support, use the plastic head screw for fine 

adjustments in height and for additional support as needed.

5.  Additional work supports can be attached to the base of the left or 

right work supports as needed.

6.  An additional work support base can be used as a free standing 

work support. Attach the 3.5 in. work support rail to the top 
surface of the support base. Secure the right brace to the 
appropriate height and angle using the knurled thumb screw. 

13-170.indb   37

2/1/13   1:46 PM

Содержание 8HPH Series

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды