manualshive.com logo in svg

Swagelok 8HPH Series, Руководство пользователя, Страница: 32 / 96

Поделиться
Скачать
Swagelok 8HPH Series Скачать руководство пользователя страница 32

30

     

Series 8HPH 

Weld Head User’s Manual

9.  Clean the teeth of the gears with the nylon brush included with the 

weld head. See Figure 50.

10. Clean the gear surfaces with a swab and isopropyl alcohol. See 

Figure 50.

11.  Clean the track area of the weld head body with a swab and 

isopropyl alcohol.   

12. Remove the electrode and ceramic insert and inspect around the 

electrode hole for damage. 

Note:

 The ceramic insert is fragile and will crack if not handled 

properly.

13. Use a wire brush to eliminate discoloration. Replace the rotor if 

arcing damage prevents normal operation.

14. Clean the rotor with a swab and isopropyl alcohol. 
15. Check the ceramic insert for damage. If it is damaged, replace it 

according to the 

Ceramic Insert Replacement

 instructions in this 

manual.

 

Figure 50    Cleaning the Guideway of the Rotor 

Track with Isopropyl Alcohol

Figure 51    Inspecting the Ceramic Insert for 

Damage

Clean the 
Track with 
Isopropyl 
Alcohol

13-170.indb   30

2/1/13   1:46 PM

Содержание 8HPH Series

































































































Отзывы:

Нет отзывов