manualshive.com logo in svg

Swagelok 8HPH Series, Руководство пользователя, Страница: 27 / 96

Поделиться
Скачать
Swagelok 8HPH Series Скачать руководство пользователя страница 27

Series 8HPH 

Weld Head User’s Manual     25  

Performing Daily Maintenance

To keep your Swagelok welding system equipment in proper 
working order, you must perform daily maintenance on the system 
components.

Daily Fixture Maintenance

At the beginning of each workday:
1.  Place the handles in the tool change position.
2.  Use a stainless steel wire brush to clean the collet surfaces of the 

side plates that contact the work. See Figure 40.

3.  Remove dirt, carbon and vapor deposits from the arc shield and 

movable side plates with a swab and isopropyl alcohol. 

Daily Weld Head Maintenance

1.  Remove dirt, carbon, and vapor deposits from the weld head 

rotor area with a clean, soft cloth or swab and a 90 % or greater 
isopropyl alcohol solvent.

2.  Clean the exposed areas of the ceramic insert with isopropyl 

alcohol, and inspect for cracks or arcing damage. If the ceramic 
insert is damaged, follow the instructions in 

Ceramic Insert 

Replacement

 to replace it.

3.  Incrementally jog the rotor and clean both sides of the rotor with a 

swab and isopropyl alcohol. See Figure 41.

Store the weld head in a clean, dry place at the end of 
each workday.

 

Caution!

 

Do not use lubricants inside 
the weld head .

Figure 41    Jogging and Cleaning 

Both Sides of the Rotor

Figure 40    Inspecting Side Plates and 

Arc Shield

Clean the Inside 

Surfaces of the 

Movable Side 

Plates

Clean the 

Arc Shield

Clean Fixed 

Side Plates

Clean Both Sides 

of the Rotor

13-170.indb   25

2/1/13   1:46 PM

Содержание 8HPH Series

































































































Отзывы:

Нет отзывов