SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
Leverkuser Strasse 65
Fax +49 (0) 2191 / 46438-40
D-42897 Remscheid
E-Mail: [email protected]
32229L
www.swstahl.de
BED
IENUN
GS
AN
LEI
TUNG /
INSTRUC
TI
ON MANU
AL
Checking the « CENTRIFUGAL ADVANCE» and «VACUUM ADVANCE»
1.
Follow the steps 1 to 4 of general procedures on Page 2 except increase the
engine speed to 2000 rpm.
2.
Trigger the timing light and rotate the knob clockwise slowly and stop until the
timing mark moves to « T.D.C» or « o» position.
3.
Read the advance angle reading from the LED display
4.
Сompare the reading with manufacturer's specification
Tach and Advance
BLACK
RED
DOT POINT FLASH
For 2 stroke and direct-
Ignition-System
Figure 1
