www.swstahl.de
SW-Stahl GmbH
Tel. +49 (0) 2191 / 46438-0
An der Hasenjagd 3
Fax +49 (0) 2191 / 46438-40
D-42897 Remscheid
E-Mail: [email protected]
03677L
BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL
Personal notes on safety:
When working with SW-Stahl tools you must always wear protec-
tive equipment in the form of protection gloves, protective goggles
and safety shoes which meet current safety standards. Protect
your eyes against of high-flying particles, your hands against
lesions and crushing and your feet against parts falling down.
Check the tool for damage, deformation, cracks, worn-out screw
threads or other defects before application.
Damaged or worn-out component parts must be exchanged
before use!
Waste disposal:
The tool set consists of the most varied materials which have
to be disposed of separately. In particular, component parts with
adherents from fuels or oils are subject to special directives.
If necessary, you can obtain advice from your local refuse collec-
tion firm.
Use according to specification:
This tool set serves for the repair of fastening screws of injectors
in Mercedes-Benz CDi engines. With this set, undamaged screw
threads in the cylinder head can be cleaned in order to achieve
the original starting torques of the fastening screw again. Further-
more, torn-off fastening screws can be reamed and the damaged
screw thread in the cylinder head repaired.
