www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: [email protected]
BEDIEUNUNGSANLEITUNG
/ INSTRUCTION
MANUAL
20700L
B.
C.
Operating instructions:
1. Lifting up load: When lifting the car, make sure that the hand brake is active and the wheels
are blocked. See iIlustration C. close the relief valve by turning the hand lever clockwise
(illustration D.). Place the jack under the vehicle in the point indicated by the car
manufacturer (straight and solid surface – free of fat or grease). Make sure that the jack is
in the centre under the lifted object. Manipulate the jack using the handling lever.
2. Releasing the load: Open the relief valve by slowly twisting the hand lever anti-clockwise
(illustration E.) The jack may be removed from the bottom of the vehicle only after its head
reaches the lowest position.
D.
E.
Maintenance:
1. Keep the jack clean, apply lubricating oil to all pivoting sections every three month.
2. Frequently check the oil level, for procedure see instructions before use.
3. Check pump piston and piston rod periodically for signs of rust or corrosion. Clean exposed
area with a clean oiled cloth.
