-7-
6.
2
RJ45 Ethernet Cable Connection
If you are installing the SVT-IP Outdoor Station in a place out of the range of your
Wi-Fi network, you may use the RJ45 Ethernet cable connection
instead.
You must first connect it to the Wi-Fi network following the instructions on pages 5
or 6. Do not remove the antenna until the RJ45 Ethernet cable connection is
completed.
Step 1: Login to your router setting page to find the IP address
and the Gateway
of
the SVT-IP Outdoor Station.
Step 2: Open Internet Explorer on your pc and type the IP address into the Address
Bar to open the "IP Camera login page".
Step 3: Login using the same default user name (admin) and password (1234) as
the ControlCam App.
Step 4:
Select "Config." - "Network Settings" - LAN, and set the IP address and
Gateway the same as your LAN network.
Select "Save" to complete the new settings.
