background image

-8-

Step 

5: 

You can now connect the RJ45 cable to the SVT-IP Outdoor Station and 

then connect the Ethernet cable to the router.

Step 6: The setup is complete. You can now remove the antenna from the SVT-IP 

Outdoor Station.

6.

3

  How to add additional users to the SVT-IP Outdoor Station: 

Step 1: 

Open the ControlCam App, select "Enter Now"

;

Step 2: S

elect "Add a Network Device"

;

There are three ways to add additional users to the SVT-IP Outdoor Station:

a.

LAN Search:

    Select "LAN Search"

 and select the outdoor station that you would like to add. 

Input the default user name and password, then select "Ok" to confirm.

b.

QR Code Scan:

    Select "QR Code Scan", input the default user name and password, then select 

"OK" to confirm.

c

. Manually Input:

    Select "Manually Input", input the outdoor station's GID, then input the 

default user name and password. S

e

lect "OK" to confirm.

Step 3: Select "..." on the top right corner of the screen;

Step 4: Select "ON" in the Outdoor call-in option. Return to the main interface. The 

setup is complete and ready to receive calls and monitor the SVT-IP outdoor 

station. 

6.

4

  How 

to r

eset 

the SVT-IP 

Outdoor Station to factory default:

If the outdoor station has been previously connected to a Wi-Fi router, you must 

first reset it to factory default prior t

o connect

ing

 

it again 

to a new Wi-Fi router

:

 

Step 1: Unplug the outdoor station from the power outlet. 

Ste

p 2: Power it back on

Step 3: Hold the call button for 45 seconds, until the LED light flashes and a "Bi..." 

sound is heard.

Содержание SVT-IP A

















Отзывы: