-5-
6.1 Wi-Fi Wireless Connection:
>There are two ways to connect the Outdoor Station to the network/router:
1. Wi-Fi wireless connection (Note that ControlCam App works with 2.4Ghz network)
2. RJ45 Ethernet cable connection
6.1.1. iPhone/iPad users:
Step 1: Once the
ControlCam
App is downloaded and installed, ensure your iPhone
or iPad is connected to the same Wi-Fi network as the one you are going to connect
the SVT-IP system
;
Step 2: Attach the Antenna to the Wi-Fi pin on the back of the outdoor station;
Step
3
: Open the ControlCam App, and select "Add a Device";
Step
4
: Select "Add a New Device";
Step
5
: Select "Start configuring";
Step
6
: Select the outdoor station to be configured, then select "Start configuring"
again;
Step
7
: Select the Wi-Fi network, input its password and then select "Setting";
Step
8
: Input the default User Name (admin) and Password (1234), then select "OK"
to confirm;
Step
9
: Go back to the device list and select "..." on the top right corner of the
screen, then select "ON" in the Outdoor call-in option.
Step
10
: Return to the main interface. The setup is complete and ready to
receive calls and monitor the SVT-IP outdoor station.
