SVP UDR-70, Руководство пользователя

Страница: 97 / 182

88
UDR-70 H.265 Portable Receiver
USER’S MANUAL V1.0
Chapter 7: Web Server
7.1 Introduction
This equipment can be controlled using a PC connected to the rear panel
Ethernet connector
,
through the Internet or a local network. The Remote
connector of the Receiver is used for this purpose.
To configure the browser interface correctly, the IP address, Subnet Mask and
Gateway need to be set correctly on this unit. Next, the steps to setup
network parameters are shown:
12. Go to Unit

Webserver P
Figure 74: Web Server screen
13. Select Locl option and set an IP address. To change the IP address
first press the OK button and then, with the Up, Down keys select the
desired number. To change from one character to another, press
Right, Left keys. Press the OK button to save the introduced value.
Figure 75: Local IP
14. Select Mask option and set the Subnet Mask. To change the Subnet
Mask address first press OK button and then, with the Up, Down keys
select the desired number. To change from one character to another,
press Right, Left keys. Press the OK button to save the introduced
value.
Figure 76: Subnet Mask