SVP UDR-70, Руководство пользователя

Страница: 86 / 182

77
UDR-70 H.265 Portable Receiver
USER’S MANUAL V1.0
•
The Local GPS Receiver and Compass can be connected to the LOCAL GPS
& COMPASS DB-9 connector or to the AUTOTRACKING Bayonet 19 pins
connector on the Receiver’s rear panel. But not to both at the same time.
•
The GPS Receiver and Compass must be installed in the base of the Van or
Boat in line with the QPT Positioner Cable connector.
Once we have made sure that the installation is correct, we can start with the
configuration of the Parabolic Antenna Autotracking system.
Next, how to configure the Autotracking with a Parabolic Antenna is explained.
First, go to Autotracking option.
Figure 60: Parabolic Antenna Autotracking menu
In this option, there are three possible types of Autotracking (Parabolic,
Multisector AMS and Omnidirectional). In this case, select the Parabolic
option with the Right and Left keys. Once the option is selected, press the
OK button to enter the configuration menu.
Once the user is inside the Parabolic Antenna option, there are three
possible options (Auto, Manual and Fold) which are detailed below:

AUTO MODE
Figure 61: Auto Menu
When the Auto option is selected, it means that the Parabolic Antenna is
aimed automatically at the Transmitter device through the GPS coordinates
of the Transmitter and the Receiver device.
Please note that, if for 30 seconds there is no GPS signal, the device will
start looking for GPS signal. If there is no GPS signal but there is RF signal,
then, the tracking will start looking for maximum RF signal received.
For a correct operation of the Auto mode, the Receiver Position must be
set, and Receiver Configuration menu must be configured.
To start configuration please press OK on Auto mode.