SVP UDR-70, Руководство пользователя

Страница: 122 / 182

113
UDR-70 H.265 Portable Receiver
USER’S MANUAL V1.0
While the data is being captured, it is necessary to remain in the Unit
section of the Webserver. If you change to another section, the
captured data will be lost.
There are two modes to send the data to the text file: manual and
automatic. Using the Auto/Manual button this mode can be changed.
In the text area related to the name of the file you must include the
name plus the extension as it is indicated in the figure below.
The process to follow in Auto Mode is:
Figure 91:Auto mode
•
First step: Configure the time interval.
•
Second step: Press the Start Button.
•
Third step: Press the Stop Button when you want to stop capturing
data.
• Fourth step: Write the name and the extension of the file to send the
data.
• Fifth step: Press the "Save to file" button.
The process to follow in Manual Mode is:
Figure 92:Manual Mode
•
First step: Press the Dump Button whenever you want to capture the
data.
• Second step: Write the name and the extension of the file to dump the
data.
• Third step: Press the "Save to file" button.
If you want to clear the captured data in one session, it is necessary to
use the "Clear" button or change to another tab of the Webserver.
Once the data is captured, open the text file to access the information.