SVP HDT-70, Руководство пользователя, Страница: 106 / 201

106
HDT-70_H.264 High Definition Camera Transmitter
MANUAL V9.0
When the equipment is switched on, these options will appear in the screen:
Figure 3.53 Profile Selection
This screen enables the user to choose one of the profiles that have been
configured before or to work as an administrator and configure any
parameter of the device.
If one of the profiles is selected, a line under the profile number will appear
and the device will be ready to work in that configuration. To access to the
profile and see its configuration, the down button must be pressed for a
short time.
It is also possible to access to the main screen of a profile. To access to the
main screen, the up button must be pressed for a short time.
Alarms and warnings are displayed if you press OK button for a short time.
Figure 3.54 Profile Selection
When a profile is selected and then, the Webserver is connected, the
different parameters of the configuration are shown on the screen but they
cannot be changed because those parameters are fixed.
As a result, a request of password will appear on the screen and it must be
necessary to enter in Config mode (CONF) using the administrator password
to change any parameter.
If CONF option is selected, pressing the OK button, the administrator
password must be introduced (8 characters). Then, press the OK button
again to access to the main screen. In this way, the user can work as an
administrator and change any parameter of the device.
PROFILE SELECTION
CONF 1 2 3 4 5 6 7
PROFILE SELECTION
CONF 1 2 3 4 5 6 7
-