SVP HDR-102, Руководство пользователя

Страница: 69 / 237

HDR-108/HDR-104/HDR-102 Diversity Receivers
MANUAL V9.8 69
4.6.2.2.6
Decoder GenLock Screen
This device has an external Genlock reference input to lock all the video
outputs to it. (reading parameter)
Figure 4.55: Decoder GenLock screen
The available options are:
 Reference lost: The device does not detect the genlock signal.
 Reference unlocked: The device detects the genlock signal but it is
not capable of synchronizing to that signal.
 Reference locked: The device detects the genlock signal and is capable
of synchronizing to that signal
Offset makes a fine adjustment in pixels. To make this adjustment, you would
need specific measuring equipment.
4.6.2.2.7
Decoder Frame Without Signal
In this file, the Receiver ’s behavior can be configured if there is no signal.
(eligible parameter).
Figure 4.56: Decoder Frame Without Signal Screen
 Freeze: The last image is frozen in the screen until the signal works
again.
 Color (10 sec): After 10 seconds, if the error is caused by the lack of
RF signal, the screen becomes red. If the error is because there is no
video, the screen becomes blue.
 Black (0.5 sec): The video becomes black after 0.5 seconds.
 Black (5 sec): The video becomes black after 5 seconds.
4.6.2.2.8
Decoder Frame Error Screen
In this file, it can be configured the decoder’s behavior if there is a frame
error. (elegible parameter).
Figure 4.57: Decoder Frame Error screen