SVP DCM-1070, Руководство пользователя

Страница: 30 / 69

Chapter 1: VT-70 Modulator
VR-70 and DCM User’s Manual Page 30
28
Ethernet configuration parameters. (port, local and remote
IP addressed)
29
Date and time. The demodulator always shows current date
and time.
30
List of alarms and/or warnings that have been detected.
When the equipment indicates the existence of an alarm
(the LED lights in red) or of a warning (the LED lights in
orange), the user can view the alarms/warnings by simply
pressing the ALARM button or using the MONITOR STATUS
menu. To view the alarms/warnings move to the line 30
using UP and DOWN buttons, then press the ENT button to
enter the “Alarms and Warnings List” submenu. If there are
no alarms or warnings, the LED next to alarm button will be
out, and if the user presses the ALARM button or accesses
the “Alarms and Warnings List” submenu, the unit displays
“No alarms” and “No warnings”.
To exit any submenu, press the MENU button.
If the user does no press any button during several minutes, the VR-70
demodulator will automatically exit the menu or submenu it was left in and
displays the main screen (in one hand reception power and frequency and
on the other hand, transmission power and frequency).
6.4 “Setup configuration” menu
Several parameters of the VR-70 demodulator, DCM down-converter and
UCM up-converter can be configured from the VR-70 demodulators SETUP
CONFIGURATION menu.
To be able to change parameters in the down-converter and the up-
converter via the demodulator, the channel selector in both equipments has
to be in 0 position.
Figure 6.3 Channel selectors in 0 position to control the down-converter
and up-converter parameters from the VR-70 demodulator.