ENG
5
PS-370
User Manual
Connecting an additional speaker
For model PS-370 you can connect an additional speaker (Bluetooth mode only):
•
Turn both speakers into Bluetooth mode;
•
Make sure both PS-370s are not connected to a signal source via Bluetooth;
•
Press and hold button
b
on both speakers. (Both speakers must be in search mode);
•
If two speakers are successfully connected between themselves, there will be a short beep;
•
Connect the signal source to the speaker.
TECHNICAL SPECIFICATIONS
Parameter, measurement unit
Value
Frequency response, Hz
70 – 20 000
Output power (RMS), W
40 (2 × 20)
Membrane, mm
Ø 70
Rated current consumption, A
0.25
Battery capacity, mA * h
3600 (2 pcs)
Power supply
USB/ 5V
Weight, g
2500
Dimensions, mm
360 × 147 × 190
Notes:
•
Technical specifications given in this table are supplemental information and cannot give
occasion to claims.
•
Technical specifications and package contents are subject to change without notice due to
the improvement of SVEN production.
Technical support is on www.sven.fi.
