ENG
4
Portable Speaker System with
Bluetooth and FM-radio
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the application.
Speaker system battery charging
•
Connect speaker system to a USB port of PC or USB charger using USB Type-C to USB cable
(included). During battery charging the indicator
a
flashes and shows the charge level.
•
The battery is used in the speaker system as an integral part of the device, therefore do not
try to extract or replace it, because this can result in the warranty cancellation or the device
damage.
OPERATION MODES
Bluetooth mode
•
Wireless data transfer via the Bluetooth protocol enables to connect speaker system to
compatible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as walls
or other electronic devices can interfere with the signal transfer.
•
Turn on the speaker in Bluetooth mode.
•
It is necessary to select the search mode of devices with Bluetooth on a signal source
(telephone, notebook, smartphone, etc.). «SVEN PS-370» massage will be displayed on the
screen which is to be connected to*.
•
When connection is successful, there will be a short beep and the indication of the search
mode on speaker system is over**.
Radio mode
Attention! To improve the quality of radio reception, connect the mini-jack signal cable to the
mini-jack (included) to the AUX input or cable USB to USB Type-C (included) to the USB input.
•
Turn on the speaker system – press button
h
several times until, the radio mode will turn on.
Long-term pressing button
c
activates auto search mode. After scanning completion, the first
scanned radio station will start to operate automatically. With buttons
d
and
i
(long pressing)
select a desired radio station.
Player mode
•
The system will enter the Player mode automatically when USB flash is connected. Use button
c
to switch between Play/Pause modes. You can control tracks by using buttons
d
(previous
track) and
i
(next track) (long pressing).
The use in the wired mode (AUX)
•
Connect the 3.5 mm mini-jack cable to the 3.5 mm mini-jack (included) to the AUX input and
the 3.5 mm jack to the signal source.
•
Turn on the speaker in AUX mode – press the button
h
several times until the speaker goes
into AUX mode.
* You might have to enter «0000» code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second
search mode activation is not obligatory. Choose the item name «SVEN PS-370» and the
«connect» command on the source.
