ENG
5
E-700B
User Manual
Device switching on
•
Remove the headphones from the charging case and they will automatically turn on.
Make sure the headphones are charged.
Device switching off
•
Put the headphones to the charging case. They will automatically turn off, or long touch
of button
c
on either headphone disconnects both headphones.
Headphone control
When connected to a telephone:
•
In order to receive an incoming call press multifunction button
c
. Press button
c
again
to finish the call.
•
In order to reset the call, press and hold button
c
(~2 seconds)*.
•
Рlay/pause: while listening music press button
c
on the right earphone.
•
Previous/next track: while listening music press button
c
twice on the right earphone to
go to the next track, press button
c
twice on the left earphone to go to the previous track.
•
Long press button
c
for about 2-3 seconds starts the voice assistant of the phone*.
* Depending on telephone/smartphone configuration.
TECHNICAL SPECIFICATIONS
Parameter, measurement unit
Value
Sensitivity, dB
headphones: 102 ± 3
microphone: -58 ± 3
Frequency range, Hz
headphones: 20 – 20 000
microphone: 30 – 16 000
Impedance, Ohm
16
Membrane, mm
Ø 7
Connection type
Bluetooth
Bluetooth supported profiles
HSP, HFP, A2DP, AVRCP
Radius of operation, m
up to 10
Operation time, h
up to 4
Operation time using a charging case, h
up to 15
Weight, g
45
Notes:
• Technical specifications given in this table are supplemental information and cannot
give occasion to claims.
• Technical specifications and package contents are subject to change without notice
due to the improvement of SVEN production.
