ENG
4
Wireless Stereo Headphones
with Microphone
•
It is necessary to select Bluetooth device search mode on a signal source (telephone,
notebook, smartphone, etc.). «SVEN E-700B» massage will be displayed on the screen,
which is to be connected to*.
•
If connection successful, there will be a short beep signal in the headphones; the search
mode indication on the headphones is over. If no devices connected, headphones will
turned off automatically in 2 minutes.
•
If you cannot connect your device or connect a headset to each other, or the sound is
played from only one earphone, you must re-enter the system to the search mode. Put
the headphones to the charging case (headphone indicators
d
turn red), press and hold
the multi-function button
c
on two headphones for 9 seconds, until the indicator
d
light
on both headphones will not blink red 1 time. Take headphones out the caseand they will
automatically connect to each other. After that, pair the headphones with the device, as
described above**.
Bluetooth Technology
•
Wireless data transfer via the Bluetooth protocol enables to connect wireless head-
phones to compatible devises. Maximum radi us of action of data transfer is 10 m. Such
obstacles as walls or other electronic devices can interfere with the signal transfer.
OPERATION
Case Charging
•
Connect the charging case (jack
g
) to PC USB port or USB charger using USB to USB
type-C (included). During battery charging indicator
a
will alternately flash white. Each
LED symbolizes approximately 25% of the charge. Indicator
a
goes out when the battery
is charged.
Case Headset Charging
•
Put the headphones to the charging case. During battery charging indicator
d
lights red.
When device is charged full, indicator
d
is white within 1 minute, then go out.
•
The battery in the headphones and case is used as an integral part of the device,
therefore do not try to extract or replace it, because this can result in the warranty
cancellation or the device damage.
* You might have to enter «0000» code to connect some models of devices via Bluetooth.
** If the item has been already registered to the source device list, then the second search
mode activation is not obligatory. Choose only the item name «SVEN E-700B» and the
«connect» command on the source.
Fig. 2. Connection diagram
PC
Headphones
Mobile device
