ENG
3
E-700B
User Manual
SAFETY PRECAUTIONS
•
Don’t use the stereo headphones while driving.
•
Don’t use the stereo headphones at high volume for a long time (more than 15 minutes),
as this may cause hearing impairment.
SPECIAL FEATURES
•
Bluetooth wireless signal transmission
•
Touch control of incoming calls and track switching
•
Two additional sets of interchangeable ear pads
•
Battery operation time up to 4 hours
•
Operating time using a charging case up to 15 hours
CONNECTION
First connection
•
Remove both headphones from the
charging case, then put them back to the
case to activate the headphones.
•
If there is a protective film on the
contacts, you must remove it before
using the headphones.
•
The battery in the headphones and
case is used as an integral part of the
device. Before using for the first time,
make sure that the headphones are
fully charged. If the headphones are
discharged, they need to be fully charged
(see headphone charging section).
Fig. 1.
DESCRIPTION
a
Charging сase LED indicator
b
Ear pad
c
Multifunction sensor button
d
Headphones LED indicator
e
Magnetic contact with charging case
f
Charging case
g
TYPE-C jack for battery charging
Headset to a device interfacing
•
It is necessary first to interconnect the device with a signal source (see the connection
diagram in Fig. 2) to transfer signals via Bluetooth. To pair the headphones with the device,
put them to the charging case, then get them out. Both earphones are automatically
switched on and connected to each other. At the same time on one earphone LED indicator
d
will alternate white and red glow, and indicator
d
on another earphone will light white.
