SVAT CV502-4CH Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 21

SVAT CV502-4CH Скачать руководство пользователя страница 11

CV502-4CH

11

SVAT ELECTRONICS

now you can see

Viewing Your DVR on Your Computer

Now that the computer is prepared to install the necessary ActiveX controls you are ready to start viewing the DVR using your computer. Using Internet Explorer,

type the IP address of the DVR into the address bar using the following format: http://192.168.0.108 and press ENTER.

If the computer and the DVR are connected to the same router you can use the internal IP address to view the DVR. If the computer is not connected to the same

router and is at a remote location you will need to use the external IP address for the DVR to view the DVR from that computer.

NETWORKING GUIDE

Log in to the DVR (Using Internet Explorer):

By default the DVR will require a user to input a password before being able

to view the DVR online. The default password for the web interface of the

DVR is:

123456

.

Installing the ActiveX controls:

There will be a yellow information bar that pops up below the address bar in

Internet Explorer. Click on the yellow information bar and then select “Install This

Add-on for All Users on This Computer…”. Please be patient as the installation

process can take 1-2 minutes.

«
...
9
10
11
12
13
...
»

Содержание CV502-4CH






















Отзывы:

Нет отзывов