CV502-4CH
10
SVAT ELECTRONICS
now you can see
Method 2:
1. Open up Internet Explorer.
2. Click on TOOLS.
3. Click on INTERNET OPTIONS.
4. Click on the SECURITY Tab.
5. Click on TRUSTED SITES.
6. Click on the SITES button.
7. Type in the IP address of the DVR in the following
format: http://192.168.0.108 and click ADD.
8. If “Require server verification (https:) for all sites...” is
selected you will need to uncheck the selection box.
The IP address used in the example above is for internal
network viewing. If you are trying to access the DVR from a
remote location you will add the “External IP Address” to the
trusted sites list. See “Testing Port Forwarding” Pg. 15
9. Change the default settings for the TRUSTED SITES
zone to low. Click on DEFAULT LEVEL and change
the security level of the zone to “low”. This can
be done by sliding the slider to the bottom. This
will allow ActiveX controls from the DVR to be
downloaded and the DVR to be viewed on
the computer.
10. Click “Apply”.
11. Click OK.
NETWORKING GUIDE