Monitoring Station SV 279 PRO
24
3.4. Configuration of the station
It is strongly advised to configure the remote communication before going on site.
1. Start by opening the SV 279 PRO station and
locating the 3G modem on the right-hand side of
the case.
2. Insert a mini SIM card into the slot in the modem.
The SIM card PIN protection must be disabled.
3. A click sound indicates that the SIM card is in the
right orientation. If necessary, use a tool (e.g.
pen) to push the SIM fully in.
4. Press
<Alt>+<Start>
on SVAN 979 to turn on
the system.
The station is programmed to automatically establish a
3G connection with SvanNET. It takes up to 5 minutes
to connect. The most important parameter of the
connection is the
APN
(Access Point Name).
5. Check the Access Point Name (APN) setting in
the SVAN 979.
The default setting for the APN is "
internet
". It’s
possible that your Internet provider is using a different
APN. In this case the APN must be entered manually,
either via the PC software or the SVAN 979 menu
(
path: <Menu> / Instrument / Wireless Transfer
Modem Connection
).
