SV 271 LITE User Manual
9
SVAN 971 can be removed from the case by the
user and used as a hand-held sound meter.
To do this the user should;
1. switch off the instrument by pressing
together
<Shift>
and
<Start/Stop>
keys,
2. unscrew
the
input
connector
and
disconnect the input cable,
3. disconnect the USB cable.
The controller is fixed in the station case by a
Signal Power Combo connector and can also be
removed from the case. To do this the user should
pull the controller up and remove it from the slot.
To return it the user should put the controller in the
slot and press on it to achieve a good fix with the
connector.
Note: The producer does not recommend removing the controller without a
sound reason. Double check that the controller has a good fixation in the
connector after a reconnecting!
The monitoring station case is equipped with an
air pressure compensation valve that enables the
user to open the case easily if the internal
pressure is lower than the atmospheric one.
Use the silica gel bags (optional accessory) for
absorbing any remaining moisture after closing
the lid.
The valve should be released if opening the top
lid is problematic.
Note: The valve must be closed when the station is used outdoors, otherwise
the case is not sealed against moisture.
The station case is equipped with two Souriau UTO type connectors for:
